PS-1696
P-THERM® PS-1696 is a single coated, thermally conductive acrylic adhesive with a copper foil carrier. The adhesive is used for application to the heat source. The heat spreader allows for quick dissipation in the x-y direction.
PS-1997
P-THERM® PS-1997 is a flexible synthetic graphite film tape on a removable polyester carrier. The construction provides a low density option to eliminate hot spots on many types of consumer electronics including phones, notebook and tablets, flat panel TVs as well as automotive infotainment and guidance modules.
PS-2097
P-DERM® PS-2097 is a trilaminate consisting of a perforated high adhesion silicone gel adhesive, polyurethane film and medical pressure sensitive acrylic adhesive. PS-2097 is supplied with a perforated 75 micron polycarbonate liner on the silicone gel adhesive side and a 30 micron non-perforated siliconized white polypropylene liner on the acrylic side of the construction.
PS-0785
PS-0785 is a single coated low tack acrylic adhesive tape with a polyester carrier. PS-0785 is supplied with a 42# dense kraft siliconized paper release liner.
PS-3014
P-DERM® PS-3014 is a single coated silicone gel adhesive tape with a polyurethane film carrier where consistent adhesion and repositionability is required. PS-3014 is supplied with a 100 micron polyethylene liner.
PS-0780
PS-0780 is a single coated self-wound low tack acrylic adhesive tape with a polyester carrier.
PS-2036
P-DERM® PS-2036 is a perforated silicone gel trilaminate consisting. PS-2036 is supplied with a 75 micron matte finish polycarbonate liner on the silicone gel adhesive side and a 54# bleached kraft siliconized release liner on the acrylic side of the construction.
PS-3066
P-DERM® PS-3066 is a single coated adhesive tape consisting of a polyurethane adhesive and nonwoven polyester when high breathable is needed. PS-3066 is supplied with a 54lb dense kraft siliconized release liner.