P-THERM® PS-1595 is a non-silicone, thermally conductive tacky phase change material with a siliconized paper release liner.
P-THERM®
PS-1595
Good Thermal Conductivity
Low Dripping
Tacky for Easy Use
Excellent Converting Properties
Low Dripping
Tacky for Easy Use
Excellent Converting Properties
| Property | Value | Test Method |
|---|---|---|
| Phase Change Temperature | 55 C | -- |
| Continuous Use Conditions | -25 - 125 C | QSP-754 |
| Dielectric Breakdown Strength (kV/mm) | 15.03 | ASTM D149 |
| Thermal Conductivity | 4.0 W/m K | ASTM D5470* |
| Thickness Range | 0.25mm | ASTM D374 |
| Color | Yellow | Visual |
| Heat Capacity (J/g K) @ 50 C | 1.09 | ASTM E1269 |
| Total Mass Loss (@ 125 C/24 hrs) | 1.00% | ASTM E595** |
| Volume Resistivity (ohm-cm) | 1.0E + 11 | ASTM D257 |
| Thermal Impedance (K cm^2 /W) @ 1mm | 10% Strain: 3.48, 20% Strain: 2.07, 30% Strain: 1.72 | ASTM D5470*** |
| Density (g/cc) | 2.39 | ASTM D792 |
* Thermal conductivity tested at 20% strain.
** Tested at atmospheric pressure
*** Values tested include interfacial thermal resistance: Application performance is directly related to surface roughness, flatness and pressure applied.
** Tested at atmospheric pressure
*** Values tested include interfacial thermal resistance: Application performance is directly related to surface roughness, flatness and pressure applied.